爆炸防控技术在爆破工程警务规划和技术评估中应用

通过介绍爆炸防控技术概念的内涵和外延,说明了爆破工程警务规划设计和技术评估的目的,就是有效防止或遏制涉爆事故,维护社会公共安全。在对一项复杂环境下的基础开挖爆破工程实施警务规划设计和技术评估时,警务技术民警对照爆破作业设计施工单位技术方案中的参数,现场核实需要保护的建筑和重要设施,准确测量保护目标与爆区的实际距离,分析是否存在影响爆破工程实施的不稳定因素,确认上述参数符合安全要求后做出准予爆破许可的建议。爆破工程警务规划设计和技术评估的要点就是要通过现场核查,核实爆破有害效应是否可控,能否确保爆破施工时周边保护目标的安全。     

Observer-based prescribed performance attitude control for flexible spacecraft with actuator saturation

This paper investigates the prescribed performance attitude control problem for flexible spacecraft subject to external disturbances and actuator constraints. By using a new performance function and an error transformation, the attitude control system is transformed into an error system which will be kept bounded to ensure expected dynamic and steady-state responses. Compared with the commonly used performance function, the modified one has an explicit prespecified terminal time which determines the maximum convergence time of the attitude control system. A modal observer and a disturbance observer are designed to deal with the flexible vibration and disturbances, respectively. Furthermore, when considering actuator saturation, an improved control strategy is developed with an auxiliary system utilized to compensate the saturation. The stability of the closed-loop system is analyzed by Lyapunov theory. Simulation results show the effectiveness and performance of the proposed methods.     

Dhh1 is a member of the SESA network

The correct separation of chromosomes during mitosis is necessary to prevent genetic instability and aneuploidy, which are responsible for cancer and other diseases, and it depends on proper centrosome duplication. In a recent study, we found that Smy2 can suppress the essential role of Mps2 in the insertion of yeast centrosome into the nuclear membrane by interacting with Eap1, Scp160, and Asc1 and designated this network as SESA (S my2, E ap1, S cp160, A sc1). Detailed analysis showed that the SESA network is part of a mechanism which regulates translation of POM34 mRNA. Thus, SESA is a system that suppresses spindle pole body duplication defects by repressing the translation of POM34 mRNA. In this study, we performed a genome-wide screening in order to identify new members of the SESA network and confirmed Dhh1 as a putative member. Dhh1 is a cytoplasmic DEAD-box helicase known to regulate translation. Therefore, we hypothesized that Dhh1 is responsible for the highly selective inhibition of POM34 mRNA by SESA.     

Robust adaptive control for unmatched systems with guaranteed parameter estimation convergence

This paper provides a modified model reference adaptive control (MRAC) scheme to achieve better transient control performance for systems with unknown unmatched dynamics, where an adaptive law with guaranteed convergence is introduced. We first revisit the standard MRAC system and analyze the tracking error bound by using L₂‐norm and Cauchy‐Schwartz inequality. Based on this analysis, we suggest a feasible way to compensate the undesired transient dynamics induced by the gradient descent–based adaptive laws subject to sluggish convergence or even parameter drift. Then, a modified adaptive law with an alternative leakage term containing the parameter estimation error is developed. With this adaptive law, the convergence of both the estimation error and tracking error can be proved simultaneously. This enhanced convergence property can contribute to deriving smoother control signal and improved control response. Moreover, this paper provides a simple and numerically feasible approach to online verify the well‐known persistent excitation condition by testing the positive definiteness of an introduced auxiliary matrix. Comparative simulations based on a benchmark 3‐DOF helicopter model are given to validate the effectiveness of the proposed MRAC approach and show the improved performance over several other MRAC schemes.     

On one boundary problem for nonlinear stationary controlled system

The object of study is nonlinear stationary controlled system of ordinary differential equations with constant disturbance in the right part. The problem of constructing the synthesising control function providing the transfer of this system from the initial state to the origin is considered. The sufficiently simple for numerical implementation algorithm of solution of the above-mentioned problem is obtained. It is shown that for local null controllability of the considered system, it is sufficient that the conditions of the Kalman's type were satisfied. In addition, the estimates restricting the choice of initial conditions and external disturbances under which the transfer is guaranteed are obtained. The main idea of the method of construction of the desired control function consists in reducing the original problem to stabilisation of a special kind linear non-stationary system and solving the Cauchy problem for an auxiliary system of ordinary differential equations closed by stabilising control. The simplicity of the realisation of this algorithm is determined by the construction of the auxiliary system and its stabilisation that could be obtained by analytical methods. The effectiveness of the method is illustrated by solving the problem of crane control and its numerical simulation.     

Structural load alleviation using distributed delay shaper: Application to flexible aircraft

Lightweight flexible aircraft suffers from unwanted oscillatory vibrations during aircraft manoeuvres. A recently developed distributed-delay signal (DZV) shaper is therefore proposed to be applied as a feedforward controller to alleviate the manoeuvre loads, as an alternative to traditional structural filters used routinely in this context. Structural filters are essentially linear low-pass filters with bandwidth below the significant flexible modes, applied to control signals generated either by the pilot’s direct input or by the flight control system. It has been showed that if instead a properly tuned signal shaper is used, better performance can be achieved: first, the target modes are significantly attenuated while the responsiveness of the aircraft is less compromised and secondly, the oscillatory nature of the vibrations are reduced. The high fidelity simulation results on a full scaled dynamic model of a highly flexible blended wing–body (BWB) aircraft show that in comparison to traditional structural filters, signal shapers significantly reduce the wing root loading (forces and moments) which provides potential structural benefits.     

A mechanism based on finger-sliding behavior for designing radial menus

Human behavior about sliding their fingers on touch screens needs to be understood for the design of radial menus. For this purpose, data about the angles of finger sliding in performing radial pointing to eight predefined directions were collected. The optimal angle ranges and boundaries for these directions were then determined by the proposed mechanism. Consistent with previous research, results showed that the deviations of slide angles for the four diagonal directions were larger than that for the four orthogonal directions. Therefore, to reduce overall pointing errors, the angle ranges for the diagonal directions should be wider than that for the orthogonal directions. Based on the proposed mechanism, the total probability of pointing errors could be limited to 0.05%, compared to the error of 2.00% if the eight angle ranges were evenly divided by the radii of a regular octagon. Besides the angles, the lengths and starting points of the slides were reported and discussed along with the oblique effect, judder effect, and screen orientation. Possible applications of the proposed mechanism for dynamic and personalized radial menus are addressed. Further research would be worthwhile to examine the effects of screen orientation and the number of predefined directions on pointing performances. Moreover, extending the research to mid-air sliding gestures would be of interest and value in designing three-dimensional radial menus.Relevance to industryThe proposed mechanism could effectively enhance the accuracy of the selections through radial menus, and could be applied to the remote controls via smart handheld devices.     

Differential graphical games for H∞ control of linear heterogeneous multiagent systems

Differential graphical games have been introduced in the literature to solve state synchronization problem for linear homogeneous agents. When the agents are heterogeneous, the previous notion of graphical games cannot be used anymore and a new definition is required. In this paper, we define a novel concept of differential graphical games for linear heterogeneous agents subject to external unmodeled disturbances, which contain the previously introduced graphical game for homogeneous agents as a special case. Using our new formulation, we can solve both the output regulation and H_∞ output regulation problems. Our graphical game framework yields coupled Hamilton‐Jacobi‐Bellman equations, which are, in general, impossible to solve analytically. Therefore, we propose a new actor‐critic algorithm to solve these coupled equations numerically in real time. Moreover, we find an explicit upper bound for the overall ‐gain of the output synchronization error with respect to disturbance. We demonstrate our developments by a simulation example.     

An EWMA signed ranks control chart with reliable run length performances

During the design phase of a control chart, the determination of its exact run length properties plays a vital role for its optimal operation. Markov chain or integral equation methods have been extensively applied in the design phase of conventional control charts. However, for distribution-free schemes, due to the discrete nature of the statistics being used (such as the sign or the Wilcoxon signed rank statistics, for instance), it is impossible to accurately compute their run length properties. In this work, a modified distribution-free phase II exponentially weighted moving average (EWMA)-type chart based on the Wilcoxon signed rank statistic is considered and its exact run length properties are discussed. A continuous transformation of the Wilcoxon signed rank statistic, combined with the classical Markov chain method, is used for the determination of the average run length in the in- and out-of control cases. Moreover, its exact performance is derived without any knowledge of the distribution of sample observations. Finally, an illustrative example is provided showing the practical implementation of our proposed chart.